go to content

 

 

TFP3000 - qualitativ sehr hochwertige PLC – gesteuerte Thermoformpresse bzw. Vakuumpresse mit Aufheizkammer, Abmessungen der Presskammer 3.000 x 1.300 mm - Kammerhöhe 100 mm – Hubbereich 900 mm – größte Werkstückhöhe 500 mm, Arbeitshöhe 700 mm, Heizung mit Elektrowiderständen 12 kW - maximale Temperatur 200 °C, ausgestattet mit einem Sublimationskit - bei dem Sublimationsprozess findet ein Farbtransfer statt, durch den in der Mineralwerkstoffplatte ein dauerhaftes Bild entsteht. Die Heizvorrichtung besteht aus einer Silikonmembran, einer Aluplatte und einem Vakuumrahmen in der Heizkammer, Leistung der Vakuumpumpe 25 m³/Stunde.

 

 

TFP3000 - high-quality PLC-controlled thermoforming press or vacuum press with heating chamber, dimensions of the pressing chamber 3.000 x 1.300 mm - chamber height 100 mm - stroke range 900 mm - largest workpiece height 500 mm, working height 700 mm, heating with electrical resistors 12 kW - maximum temperature 200 ° C, equipped with a sublimation kit - during the sublimation process there is a colour transfer that creates a permanent image in the solid surface. The heating device consists of a silicone membrane, an aluminium plate and a vacuum frame in the heating chamber, performance of the vacuum pump 25 m³ / hour.

 

 

TFP3000 - presse de thermoformage ou sous vide contrôlée par PLC de haute qualité avec chambre de chauffage, dimensions de la chambre de pressage 3000 x 1300 mm - hauteur de chambre 100 mm - plage de course 900 mm - plus grande hauteur de pièce 500 mm, hauteur de travail 700 mm, chauffage avec résistances électriques 12 kW - température maximale 200 ° C, équipé d'un kit de sublimation - pendant le processus de sublimation, il y a un transfert de couleur qui crée une image permanente dans la surface solide. L'appareil de chauffage se compose d'une membrane en silicone, d'une plaque en aluminium et d'un cadre à vide dans la chambre de chauffage, performance de la pompe à vide 25 m³ / heure.

 

 

FP3000 - termoformartici o pressa a vuoto di alta qualità controllata da PLC con camera di riscaldamento, dimensioni della camera di pressatura 3.000 x 1.300 mm - altezza della camera 100 mm - campo di corsa 900 mm - massima altezza del pezzo 500 mm, altezza di lavoro 700 mm, riscaldamento con resistenze elettriche 12 kW - temperatura massima 200 ° C, dotato di un kit di sublimazione - durante il processo di sublimazione c'è un trasferimento di colore che crea un'immagine permanente sulla superficie solida. Il dispositivo di riscaldamento è costituito da una membrana di silicone, una piastra di alluminio e un telaio per vuoto nella camera di riscaldamento, prestazioni della pompa per vuoto 25 m³ / ora.

 

 

 

 

 

Impressum